Lead Oil Ground No. 1 (pint)

16 fl oz 1 pint (473 ml)
CAUTION! This product contains lead. Read the Material Safety Data Sheet for more information.

Rublev Lead Oil Ground is a blend of white pigments and linseed oil for a semi-absorbent ground ideal for oil painting. It dries within two days to one week, depending upon local conditions, such as humidity, light and temperature.

The important characteristics that grounds should have are (1) adhesion, 2) flexibility, 3) penetration control, 4) a type of surface to which upper layers can adhere well, 5) blister and crack resistance, and 6) good application properties. Careful selection of ingredients in an oil ground is essential to impart these qualities to the ground. Ground natural calcite (calcium carbonate) in combination with lead white (basic lead carbonate) and a maximum chalk resistant grade of rutile titanium dioxide have proven to be an excellent choice of pigments in such oil grounds.

Pigments
We make Rublev Lead Oil Ground #1 using all three white pigments; calcite, lead white and titanium white in just the right proportions to make a film that remains flexible, tough and has some degree of absorbency.

The dry ground calcite we use in Rublev Lead Oil Ground #1 has a closely controlled particle size distribution. This grade of calcite is designed to provide the lowest possible oil absorption. It offers the desired penetration control with maximum chalk resistance. Calcite aids in forming the type of surface on grounds to which upper layers will adhere easily.

Lead white, and to a lesser degree, ground calcite, have low water absorption properties and hence develop better blister and crack resistance. Furthermore, lead white contributes to more film flexibility.

The presence of titanium white increases the opacity of this ground and provides a brilliant white surface. We have selected a grade of titanium white that exhibits good hiding and excellent dispersion properties.

Many manufacturers use zinc white to get a brighter white in their white grounds and paint. Zinc oxide is not recommended in oil grounds, since it tends to cause blistering and cracking in oil paint and grounds -- we have not used any zinc in this product.

Vehicle
After many trials, we have carefully chosen a specific blend of refined and raw linseed oil with heat-bodied linseed oil such that there is a limited penetration of the oil into the canvas or panel to assure good adhesion to this substrate and yet maintain sufficient holdout to establish a good foundation for the upper layers. This blend of linseed oil also provides the best possible leveling properties, so brush and knife marks are minimized.

Read the Material Safety Data Sheet (MSDS) for this Product

Availibility: Usually ships within 24 hours.